M-100/120/154 Series (1.5 – 2HP)
- M100T SERIES
M100ST
M100T
M120T
M154ST
M154T
| 50Hz | M100T | M100ST | M120T | M154T | M154ST |
| Discharge Connection | 2″ | 2″ | 2″ | 2″/3″ | 2″/3″ |
| Rated Power [HP/kW] | 1.5/1.3 | 1.5/1.3 | 2/1.5 | 2/1.5 | 2/1.5 |
| Speed [rpm] | 2850 | 2850 | 2850 | 2850 | 2850 |
| Rated Current @ 230v (1 Ph.) | N/A | 9.5A | N/A | N/A | 14A |
| Rated Current at 415v (3 Ph.) | 2.3A | N/A | 3.9A | 4.11A | N/A |
| Solids Passage [mm] | 6 | 6 | 6 | 6 | 6 |
| Submergence [min, max ] | Min – 50mm, Max – 15m | Min – 50mm, Max – 15m | Min – 50mm, Max – 15m | Min – 50mm, Max – 15m | Min – 50mm, Max – 15m |
| Height [mm] | 384 | 407 | 414 | 593 | 623 |
| Weight [kg] | 18 | 22 | 22 | 28 | 32 |
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC).
BALL BEARINGS
The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, PVC insulated double sheathed, copper conductor flexible cable, 15M length for M100T and 20M for M120T,M154T.
SHAFT SEAL
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
CORROSION RESISTANT
Epoxy coated Aluminum Outer Casing Epoxy coated
Extruded Aluminum Stator Casing
Nitrile Rubber– Lined Diffuser.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC is Standard.
pH Range: 5 – 8
OUTLET
HOSE/ BSP