MH 480 (10HP)
- MH480S
MH480S-1
| 50Hz | MH480S |
| Discharge Connection - [mm] | 150 mm |
| Power Range [kW] | 10/7.5 |
| Max Flow Range – [LPM] | 4200 |
| Max Shut-oFF Head - [m] | 18 |
| Solids Handling - [mm] | 128A |
| Impleler Type | Channel |
| Power Supply 415 volts | Yes |
| Max Starts/Stop per hour | 15 |
MOTOR
4-pole induction continuous rated motor with squirrel cage rotor. Bi-metallic switches (thermals) embedded in stator winding to protect against overheating. Stator insulation class ‘H’ (180ºC)
BALL BEARINGS
The rotor shaft is carried in two ball bearings. Double row contact lower bearing is capable of carrying high thrust and radial loads. Upper bearing is a deep groove single row oversized bearing. The bearings are enclosed with high temperature greasecontaining special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable, 50ft. (15m) length standard. EPR cable 6 core X 4 Sq mm
SHAFT SEALS
Compact Tandem Tungsten Carbide/Tungsten Carbide Upper & Lower Mechanical seals minimize shaft overhang and deflection maximizing mean time between service intervals. Optional moisture sensor available to detect progressive seal wear.
HYDRAULICS
Single Channel Impellers, Hydrodynamically balanced with improved flow pattern contribute to a virtually clog-free pump.