50Hz | MS480S | MS481S | MS482S | MS484S |
Discharge Connection - [mm] | 100mm | 100mm | 150mm | 100mm |
Power [HP/kW] | 7.5/5.5 | 10/7.5 | 10/7.5 | 10/7.5 |
Max Flow Range – [LPM] | 2400 | 3300 | 4700 | 5200 |
Max Shut-oFF Head - [m] | 22 | 26 | 18 | 11 |
Solids Handling - [mm] | 75mm | 75mm | 100mm | 75mm |
Impeller Type | Channel | Channel | Channel | Channel |
Power Supply 415 V volts | Yes | Yes | Yes | Yes |
Max Starts/Stop per hour | 15 | 15 | 15 | 15 |
MOTOR
4 pole induction continuous rated motor with squirrel cage rotor. Bi-metallic switches (thermals) embedded in stator winding to protect against overheating. Stator insulation class ‘H’ (180ºC)
POWER SUPPLY
3 phase, 50 Hz, AC Supply. Available in 415 V voltage.
BALL BEARINGS
The rotor shaft is carried in two ball bearings. Double row contact lower bearing is capable of carrying high thrust and radial loads. Upper bearing is a deep groove single row oversized bearing. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, EPR insulated, single sheathed copper conductor flexible cable fitted with strain relief grip, 15 mtr length of 6 cores [4 core 2.5 sq. mm + 2 core 1 sq. mm.]
SHAFT SEALS
Compact Tandem Tungsten Carbide/Tungsten Carbide Upper & Lower Mechanical seals minimize shaft overhang and deflection maximizing mean time between service intervals. Moisture sensor available to detect progressive seal wear.