MS 4000 SERIES (30-75HP)

MS 4000 SERIES (30-75HP)
  • MS4000SMS4000S
  • MS4000MS4000
  • MS4300SMS4300S
  • MS4500SMS4500S
  • MS4550SMS4550S
  • MS4650SMS4650S
  • MS4750SMS4750S
MS 4000 SERIES (30-75HP)
50Hz MS4300S MS4500S MS4550S MS4650S MS4750S
Discharge Connection- [mm] 100mm 100mm 150mm 100mm 100mm
Power [HP/kW] 30/22.38 50/37.3 55/41.0 65/48.5 75/56.25
Max Flow Range – [LPM] 325 3250 15500 3450 3800
Max Shut-oFF Head - [m] 22 54 24 58 69
Solids Handling - [mm] 30mm 30mm 65mm 30mm 30mm
Impeller Type Semi Open Semi Open Semi Open Semi Open Semi Open
Power Supply 415 V Volts Yes Yes Yes Yes Yes
Max Starts/Stop per hour 15 15 15 15 15

MOTOR

4 pole induction continuous rated motor with squirrel cage rotor. Bi-metallic switches (thermals) embedded in stator winding to protect against overheating. Stator insulation class ‘F’ (155ºC)

POWER SUPPLY

3 phase, 50 Hz, AC Supply. Available in 415 V voltage.

BALL BEARINGS

The rotor shaft is carried in two ball bearings. Double row contact lower bearing is capable of carrying high thrust and radial loads. Upper bearing is a deep groove single row oversized bearing. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.

POWER CABLE

Waterproof/oil proof, PVC insulated, double sheathed copper conductor flexible cable fitted with strain relief grip,

MS4300S 2 X 4 core 06 sq. mm + 1 X 4 core 1.5 sq. mm.
MS4500S, MS4550S, MS4650S 2 X 4 core 10 sq. mm + 1 X 4 core 1.5 sq. mm.
MS4300S 2 X 4 core 16 sq. mm + 1 X 4 core 1.5 sq. mm.

 

SHAFT SEALS

Compact Tandem Tungsten Carbide/Tungsten Carbide Upper & Lower Mechanical seals minimize shaft overhang and deflection maximizing mean time between service intervals.

TECHNICAL LEAFLET

MS4000

PERFORMANCE CURVE

MS4300S

MS4500S

MS4550S

MS4650S

MS4750S