G-1000 Series (50HP)
- G1000T
G1002T
G1006T
| 50Hz | G1002T | G1006T |
| Discharge Connection | 8″ | 6″ |
| Rated Power [HP/kW] | 50/37 | 50/37 |
| Speed [rpm] | 2850 | 2850 |
| Rated Current at 415v (3 Ph.) | 62A | 62A |
| Solids Passage [mm] | 40 X 10 | 12 |
| Submergence [min, max ] | Min – 127mm, Max – 15m | Min – 127mm, Max – 15m |
| Height [mm] | 1038 | 1038 |
| Weight [kg] | 248 | 375 |
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)
BALL BEARINGS
Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, PVC insulated, double sheathed, copper conductor flexible cable 20 mtrs length for G1002T and 40 mtrs for G1006T double run.
(4 core x 10 sq.mm. + 2 core x 1 sq. mm. and another cable 4 core x 10 sq.mm.)
SHAFT SEAL
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
CORROSION RESISTANT (G1002)
Epoxy coated Steel Outer Casing
Aluminum Stator Casing
Nitrile Rubber– Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC is Standard.
pH Range 5 – 8
CORROSION RESISTANT (G-1006)
Epoxy coated Steel Outer
Casing Cast Iron Stator Casing
Nitrile Rubber– Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
OUTLET
HOSE/ BSP
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 56HRC is Standard.
pH range 6 – 11