|50Hz||NC 06||NC 08||NC 10|
|Discharge Connection||100 mm||100 mm||100 mm|
|Rated Power [HP/kW]||6/4.5||8/6||10/7.5|
|Rated Current at 415v (3 Ph.)||9.8||12||15.5|
|Solids Passage [mm]||up-to 60||up-to 60||up-to 60|
|Submergence [min, max ]||Min – 60mm, Max – 15m||Min – 60mm, Max – 15m||Min – 60mm, Max – 15m|
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC).
The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
Waterproof/oil proof, EPR insulated, single sheathed copper conductor flexible cable fitted with strain relief grip, 15 mtr length of 4 cores X 2.5 sq. mm. (For NC06M SS & NC08M SS) 4 Cores X 4 sq .mm. for NC10M. SS
Tandem Silicon Carbide/Silicon Carbide and Silicon Carbide/Silicon Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
Stator Casing: 316 Stainless Steel
Wear plate: 316 Stainless Steel
Shaft: 431 Stainless Steel
Hardware: 316 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC or 316SS
Volute: 316 Stainless Steel
pH Range 2 – 10
HOSE / FLANGE