G-900 Series (35HP)
- G900T
G902T
G906T
| 50Hz | G902T | G906T |
| Discharge Connection | 8″ | 6″ |
| Rated Power [HP/kW] | 35/26 | 35/26 |
| Speed [rpm] | 2800 | 2800 |
| Rated Current at 415v (3 Ph.) | 51A | 51A |
| Solids Passage [mm] | 40 X 10 | 10 |
| Submergence [min, max ] | Min – 127mm, Max – 15m | Min – 127mm, Max – 15m |
| Height [mm] | 1010 | 1010 |
| Weight [kg] | 232 | 239 |
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)
BALL BEARINGS
Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, PVC insulated, double sheathed copper conductor flexible cable, 20mtrs length long for DOL-Start and 20 mtrs length long for Star Delta-Start of sizes as under:
For DOL Start—Single run (4 core 10 sq.mm. + 2 Core 1 sq.mm.)
For Star Delta Start—Double run (4 Core 10 sq.mm. + 2 Core 1 sq.mm and another cable of 4 Core x 10 sq.mm.)
SHAFT SEAL
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
CORROSION RESISTANT
Epoxy coated Steel Outer
Casing Cast Aluminum Stator Casing
Nitrile Rubber– Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC is Standard.
pH Range 5 – 8
OUTLET
HOSE/ BSP