M-700 Series (16HP)
- M700T
M702T
M706T
| 50Hz | M702TM | M706TM |
| Discharge Connection | 6″ | 4″ |
| Rated Power [HP/kW] | 16/11.8 | 16/11.8 |
| Speed [rpm] | 2850 | 2850 |
| Rated Current at 415v (3 Ph.) | 24A | 24A |
| Solids Passage [mm] | 25.5 x 5 | 10 |
| Submergence [min, max ] | Min – 90mm, Max – 15m | Min – 90mm, Max – 15m |
| Height [mm] | 980 | 963 |
| Weight [kg] | 135 | 140 |
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)
BALL BEARINGS
Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof / oil proof, PVC insulated, double sheathed copper conductor flexible cable, 20 mtr long 4 Core x 4 sq.mm. The Cable is fitted with stain relief grip.
SHAFT SEAL
Tandem Tungsten Carbide / Tungsten Carbide and Tungsten Carbide / Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
CORROSION RESISTANT
Epoxy coated Steel Outer Casing
Epoxy coated Aluminum Stator Casing
Nitrile Rubber – Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC is Standard.
pH Range 5 – 8
OUTLET
HOSE / BSP / FLANGE