G-800 Series (25HP)
- G800T
G802T
G806T
| 50Hz | G802T | G806T |
| Discharge Connection | 6″ | 4″ |
| Rated Power [HP/kW] | 25/19 | 25/19 |
| Speed [rpm] | 2850 | 2850 |
| Rated Current at 415v (3 Ph.) | 39A | 39A |
| Solids Passage [mm] | 40 X 10 | 10 |
| Submergence [min, max ] | Min – 127mm, Max – 15m | Min – 127mm, Max – 15m |
| Height [mm] | 900 | 900 |
| Weight [kg] | 180 | 186 |
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)
BALL BEARINGS
Single row deep groove upper bearing. Double angular contact lower bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof / oil proof PVC insulated, double sheathed, copper conductor, flexible cable 20 Mtrs long and of sizes as under
For DOL start : Single run (4 Core x 6 sq.mm. + 2 Core x 1 sq.mm.)
For STAR DELTA Start : Double run (4 core x 4 sq.mm. + 2 core x 1 sq.mm. + 4 core x 4 sq.mm.)
SHAFT SEAL
Tandem Tungsten carbide / Tungsten carbide and Tungsten Carbide / Tungsten Carbide Mechanical seals wholly enclosed in an oil chamber.
CORROSION RESISTANT
Epoxy coated Steel Outer
Casing Aluminum Stator Casing
Nitrile Rubber – Lined Diffuser/Wear plate.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC is Standard.
pH Range 5 – 8
OUTLET
HOSE / BSP