G-500 Series (5 – 10HP)
- G500T
G502T
G504T
G506T
G530T
G536T
G554T
G556T
| 50Hz | G502T | G504T | G506T | G530T | G536T | G554T | G556T |
| Discharge Connection | 4″/3″ | 4″/3″ | 3″ | 4″/3″ | 3″ | 4″/3″ | 3″ |
| Rated Power [HP/kW] | 5/3.7 | 5/3.7 | 5/3.7 | 7.5/5.5 | 7.5/5.5 | 10/7.5 | 10/7.5 |
| Speed [rpm] | 2850 | 2850 | 2850 | 2850 | 2850 | 2850 | 2850 |
| Rated Current at 415v (3 Ph.) | 7.8A | 7.8A | 7.8A | 12.5A | 12.5A | 15.5A | 15.5A |
| Solids Passage [mm] | 25 x 6 | 25 x 6 | 6 | 30 x 9.5 | 6 | 30 x 9.5 | 6 |
| Submergence [min, max ] |
Min – 80mm, |
Min – 80mm, Max – 15m |
Min – 80mm, Max – 15m |
Min – 80mm, Max – 15m |
Min – 80mm, Max – 15m |
Min – 80mm, Max – 15m |
Min – 80mm, Max – 15m |
| Height [mm,] | 580 | 580 | 605 | 675 | 650 | 700 | 690 |
| Weight [kg] | 50 | 50 | 52 | 59 | 61 | 64 | 67 |
MOTOR
2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘H’ (180ºC)
BALL BEARINGS
The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high temperature grease-containing special Anti-corrosion additive.
POWER CABLE
Waterproof/oil proof, PVC insulated double sheathed, copper conductor flexible cable, 20M length of size.
SHAFT SEAL
Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber.
CORROSION RESISTANT
Epoxy coated Aluminum Outer
Casing Epoxy coated Extruded Aluminum Stator Casing
Nitrile Rubber– Lined Diffuser/Wear plate. Polyurethane Optional.
Shaft: 431 Stainless Steel
Hardware: 304 Stainless Steel
Impeller: Nitride Hardened 410SS to 52HRC is Standard.
pH Range 5 – 8
OUTLET
HOSE/ BSP